PPF in Noida: Paint Protection Film at Detailing Bull, Sector 83
PPF in Noida at Detailing Bull means paint protection film fitted at our Sector 83 studio by trained installers, with a written quote and warranty before you pay. We are a fitment centre for Llumar, Garware, XPEL, STEK, Gaamp, Nord PPF, Avery Dennison and Bull Armour, and we fit clear, gloss, matte and colour PPF, including pre-cut kits for popular models. We also apply ceramic and graphene coatings, wraps, window films and dent and paint repair. Every job starts with a paint inspection in daylight, and you get before and after photos on WhatsApp.

PPF Price Table
Place this right after the PPF and pre-cut PPF sections. Fill in the real starting prices and keep the note under the table.
PPF in Noida: starting prices by car size
| Coverage | Hatchback | Sedan | SUV |
|---|---|---|---|
| Front protection (bumper, bonnet front, mirrors) | ₹8000 | ₹9000 | ₹12000 |
| Partial (front + fenders + door edges) | ₹8000 | ₹9000 | ₹12000 |
| Full body, gloss clear PPF | ₹65000 | ₹75000 | ₹75000 |
| Full body, matte or colour PPF | ₹95000 | ₹1,05,000 | ₹1,05,000 |
Prices are starting prices and depend on the film you choose, your exact model and the condition of the paint. You get the exact price in writing after we inspect the car.
What we do
Our car detailing services in Noida
Each service below says what it does, what it does not do, and which cars it suits. If a service is wrong for your car, we will tell you before you spend anything.
protection
Paint protection film (PPF)
PPF is a clear, flexible film that sits on top of your paint. When a stone hits at speed on the Noida Expressway or the Yamuna Expressway, the film takes the hit and your paint stays whole. Most modern films also have a top layer that closes light swirl marks with heat, from the sun or from warm water.
We fit film on the front bumper, bonnet, fenders, mirrors and door edges at minimum, and we can cover the full car. We clean, decontaminate and correct the paint first, because film locks in whatever is underneath it.
You can choose from eight film brands, listed in the PPF brands section below, so the film matches your budget and warranty needs.
Best for: new cars, cars that see highway driving, and anyone who wants to keep original factory paint for resale.
protection
Pre-cut PPF
Pre-cut PPF comes as a kit that a plotter has already cut from a digital pattern for your exact model. Nobody drags a blade over your paint, which removes the main risk of hand-cut film. Fitting is also quicker, so the car is with us for less time.
The trade-off is that patterns exist only for popular models, and edges sometimes need a small trim or wrap by hand to sit right. If your car has no good pattern, we hand-cut it instead and say so in the quote.
Best for: popular models with an available pattern, and owners who want a lower price than full custom-cut work.
Protection and colour
Colour PPF
Colour PPF changes the look of the car and protects it in the same job. You get gloss, satin or matte finishes in a range of shades, backed by the same impact protection as clear film. Your original paint stays underneath, unchanged.
It costs more than a vinyl wrap because the film is thicker and harder to fit. If protection matters to you as much as colour, this is the better choice. If you only want a new colour, a wrap is cheaper.
Best for: owners who want a colour change and stone-chip protection together.
Coating
Ceramic coating
Ceramic coating is a liquid that bonds to the paint and cures into a hard, glossy layer. Water beads and rolls off, dust sticks less, and washing takes less effort. It also gives some protection against UV, bird droppings and the water spots that hard water leaves after a wash.
It does not stop stone chips and it does not make paint scratch-proof. Anyone who tells you otherwise is selling you something. We do a full paint correction first so the coating seals in a clean surface, and we tell you how long to keep the car dry while it cures.
We apply our coatings using products from Bull Armour, 3M and Koch Chemie.
Best for: daily-driven cars parked outside, and owners who want easier washing and lasting gloss.
Coating
Graphene coating
Graphene coating is a ceramic coating with graphene added to the formula. In use it tends to resist water spots a little better and feels slicker to the touch. That helps in Noida, where hard water leaves marks on cars that dry in the sun.
The gain over a good ceramic coating is real but modest, and it costs more. Like ceramic, it does not protect against stone chips or deep scratches. We will show you both options and let the price and your parking situation decide.
Best for: cars that dry outdoors in hard-water conditions, and owners who want the slickest finish.
Coating
Brophene coating
Brophene coating is another coating we apply at Detailing Bull, for owners who want to look beyond standard ceramic and graphene. We prepare the paint the same way as for any coating, with a wash, decontamination and paint correction, because a coating shows whatever sits underneath it.
We will show you the product sheet and the warranty terms, and explain in plain words what it does and where it falls short compared with ceramic and graphene. Like any thin coating, it does not stop stone chips.
Best for: owners who want another coating to compare against ceramic and graphene before they decide.
Coating
Car colour wraps
A vinyl wrap changes your car’s colour without a respray. You can pick gloss, satin, matte, chrome or textured finishes, and you can remove the wrap later to go back to the original paint. A wrap also covers small paint flaws and keeps minor wear off the paint beneath.
Wraps need healthy paint. Peeling clear coat or a cheap respray can lift when the vinyl comes off. We check the paint in daylight before we quote and tell you if a wrap is a bad idea for your car.
Best for: a full colour change, a themed look, or a temporary change you can reverse.
Repair
Car dent and paint repair
If the paint is not cracked and the metal has not stretched too far, we can often remove a dent with paintless dent repair. That keeps your original paint and costs less than a respray. Parking-lot dings and door-edge dents are the usual candidates.
Sharp creases, cracked paint and rust need panel work and repainting. We use Glasurit paint, a premium automotive refinish brand, and match the colour to your car’s paint code, blend it into the next panel so there is no visible line, and finish with clear coat. You can add PPF or a coating after repair to protect the new paint.
Best for: parking dents, scrapes, bumper damage and faded or peeling panels.
Custom finish
Hydrodipping car parts
Hydrodipping transfers a printed film from the surface of water onto a part. We prep and prime the part, dip it, then seal it with clear coat. Popular patterns include carbon fibre, wood grain, brushed metal and camouflage.
It suits small and medium parts: mirror caps, dashboard and door trims, grille inserts, wheel centre caps, spoilers and interior panels. Large body panels are better done with a wrap or paint.
Best for: giving worn or plain plastic trim a custom look at a low cost.
Glass
Car window, windshield, cooling and sunroof film in Noida
Noida summers turn a parked car into an oven. Film on the glass cuts the heat, glare and UV that come through it. We fit films cut to your exact glass, and we recommend options that follow Indian rules on light transmission. Film brands we use: Gaamp, Bull Armour, Nord PPF.
Glass
Car window film
Window film goes on the inside of the side and rear glass. It reduces glare and heat, blocks most UV, adds privacy and helps hold the glass together if it ever breaks. UV is also what fades dashboards and seats, so film protects the interior as well as the people in it.
The darkness of the film is your choice within the legal limit. A very dark film is often less useful than a lighter film with good heat rejection, and it can make night driving harder.
Best for: daily drivers, families with children in the back, and cars parked in the sun.
Glass
Car windshield film
The windshield is the largest piece of glass on the car, so it lets in the most heat. A clear windshield film cuts heat and UV and takes the edge off glare, while the glass stays bright enough to see through clearly, including at night and in rain.
Because you look through the windshield all the time, we only fit films made for it and we do not go dark on the front glass.
Best for: drivers who sit in direct sun on long commutes and want less glare and a cooler cabin.
Glass
Car cooling film
Cooling film, also called heat rejection film, is built to block infrared heat from the sun. The better films stay fairly light in colour, so you keep a clear view and still feel the difference on your arms and legs.
Ask for the maker’s numbers, such as total solar energy rejected and visible light transmission, and compare those between films. Sales talk about “cooling” tells you little. We show you the data sheet and a heat demo on request.
Best for: anyone who wants a cooler cabin without making the glass look dark.
Glass
Car sunroof film
Panoramic and sunroof glass lets in a lot of heat and UV from above, and most of it lands on the front seats. A film on the inside of the roof glass reduces that heat and the glare, and keeps the sky view.
Roof glass is curved, so it needs careful shaping and fitting to avoid creases at the edges. We check the glass and any factory tint first and tell you what the film will do on your roof.
Best for: cars with a sunroof or panoramic roof that gets hot in summer.
Films we fit
PPF brands we fit in Noida
Detailing Bull is a professional fitment centre for these paint protection films. You pick the brand, and our team fits it.
Films differ in thickness, finish, self-healing behaviour, clarity over time and warranty. A higher price does not suit every car or every owner. We explain the range of films we hold in stock, show you samples, and recommend one based on your car, your budget and how you use it.
Warranty terms are set by each brand and differ between film lines. We give you the exact terms for your film in writing before you pay.
PPF, ceramic, graphene or wrap?
People often ask us which one to pick. This table shows what each option does and does not do. Many cars end up with PPF on the front and a coating on the rest.
PPF
Ceramic
Graphene
Vinyl wrap
Stone chips
Best Yes, this is its job
No
No
Slight
Light scratches
Yes, many films self-heal
Some resistance
Some resistance
Some resistance
Water beading and easy washing
Good on most films
Very good
Very good
Fair
Water spots
Fair
Good
Better
Fair
Changes colour
Only colour PPF
No
No
Yes
Can be removed
Yes
No, it wears off
No, it wears off
Yes
Local conditions
What Noida roads and weather do to paint
Sun, dust and hard water
Summers here run above 40°C. Long hours of direct sun dry out clear coat and fade reds and blacks first. Dust settles every day, and a wash with hard water leaves white spots that bake into the surface if the car dries outside.
Cars parked in open society lots or on the road take the worst of it. Bird droppings and tree sap add to the damage because they etch the clear coat if left for days.
Expressways and traffic
Fast highway driving throws gravel at the front of the car. The bonnet, bumper and mirrors collect chips that turn into rust spots over a few monsoons. Dense city traffic adds door dings and bumper scrapes.
This is why we usually suggest film on the front of the car and a coating on the rest. We will look at how you drive and where you park before we recommend anything.
How a job runs
How a Detailing Bull job works
01
Inspection
We look over the paint in daylight and under inspection light. We note existing scratches, dents, repaints and chips, and show them to you.
02
Written quote
You get the work, the product, the warranty and the price on paper. If we think you need something different from what you asked for, the quote says why.
03
Wash and decontamination
We wash the car, remove bonded dirt and iron particles, and dry it fully. Skipping this step is the main reason coatings and films fail early.
04
Paint correction or repair
We polish out swirls where needed, or complete any dent and paint work first. Protection goes on only after the surface is right.
05
Fitting or application
We fit the film, apply the coating or wrap the panels in a clean, controlled bay. Edges, door jambs and joins get extra attention.
06
Cure and handover
We check every panel under light with you, explain how to wash the car, and tell you how long to keep it dry. Photos of the finished work go to you on WhatsApp.
Who you are dealing with
Why car owners in Noida choose Detailing Bull
Protection work is hard to judge on the day you collect the car. The real result shows up a year later. So here is exactly what we do and what you can hold us to.
Glass
Who does the work
specializes in high-end vehicle detailing, ceramic coatings, and precision PPF installations, ensuring complete paint protection and long-lasting shine for every customer.
Glass
Materials we use
For PPF we fit Llumar, Garware, XPEL, STEK, Gaamp, Nord PPF, Avery Dennison and Bull Armour. For coatings we use Bull Armour, 3M and Koch Chemie, and we apply Brophene coating. For repaint work we use Glasurit paint. For window, windshield, cooling and sunroof film we use Bull Armour. We tell you the brand and the warranty before you pay, so you can check it with the maker.
Glass
Warranty in writing
Every film and coating job comes with written terms that say what is covered and what is not. Ask to see them before you decide.
Glass
We say no when it is right
We will advise against PPF on failing clear coat, against a wrap on a cheap respray, and against any coating if you want it to stop stone chips. We would rather lose a job than do one that fails.
Glass
Before and after photos
You get photos of the paint before we start and after we finish, so any later question has a record to check against.
Glass
Real customer work
See why vehicle owners trust us with their cars—read our real customer reviews and 5-star experiences. Click here for all reviews
Questions we hear most
Frequently asked questions
Local conditions
Book an inspection in Noida
Tell us your car model, year and what you want done. Send a few photos of the paint if you can. We will reply with what we suggest and a price range, then confirm the exact price after we see the car.
Detailing Bull
A 212, A Block, Sector 83, Noida, Uttar Pradesh 201304
Phone: : 09760137397
Email: detailiingbull@gmail.com
